Dayton’s Whole House Fans are an efficient, economical way to cool your home.Our Whole House Fans will cool your home to the outside temperature 5 to 10 times faster than central air conditioning at less than 1/10th the cost!
High Energy Efficiency
A whole house fan is much more environmentally-friendly an option than central air conditioners or room air conditioning units.
Low Operating Costs
During operation, a whole house fan costs about 60-90% less than air conditioner. It is far cheaper and you can save hundreds of dollars in your electric bill every summer.
Low Cost of Appliance
A whole house fan generally costs half as much as a window air-conditioning unit. It can be 10 times cheaper than a central air conditioning unit. If you do not have extreme summer weather, this appliance can replace your air conditioner entirely.
Removal of Stale Indoor Air
Because a whole house fan draws in hot air to the attic and then lets it out of the house, indoor air is considerably fresher. This helps remove and prevent odors and provides excellent ventilation all around the house.
Quiet Operation
Newer models of whole house fans operate quite quietly, and do not emit the loud, disturbing noises associated with large fans. You can operate a whole house fan throughout the night and enjoy a good night’s sleep.
Reduced Need for Air Conditioning
When you use a whole house fan, the entire house can be effectively cooled down by drawing in air from the outside. When operated during summer mornings, evenings, or nights, there is usually no need for air conditioning. In fact, you should not use an air conditioner at the same time as a whole house fan, because the cool air from the air conditioner will be let out of the house and replaced by air from outside.
| Model | Blade Size | Airflow | For Areas Up To | Vents Needed | Installed |
|---|---|---|---|---|---|
| 5NRT2 | 30 inch | 4280-6510 cfm | 1500sf | 3-6 sf | $1,295 |
| 5NRT3 | 36 inch | 7290-10820 cfm | 3000sf | 4-6 sf | $1,395 |
| 5NRT4 | 40 inch | 7600-11370 cfm | 4000sf | 6-8 sf | $1,595 |
Additional roof venting may be required to meet manufacturer’s specs, 1 sq. ft Roof Vent are $125 Installed
DAYTON BELT DRIVE FAN
Two-speed motor
Wall switch and 12-hour timer included
Five-blade propeller
Rubber mounted, sealed fan shaft bearings
Sponge rubber vibration damper between wood frame and fan for quieter operation
Heavy gauge steel welded construction
Dayton whole house ventilating fans cool and ventilate the entire home by replacing hot, stale air from living areas with cooler outside air. Fans are fully assembled (motor is assembled in collapsed position for ease of shipping and handling) with a sturdy propeller, permanently lubricated ball bearing pillow blocks, 2-speed resilient mount motor, and a heavy-gauge steel venturi panel with sturdy supports. A wood plenum and adhesive-backed sponge rubber mounting strips simplify installation. All models include a 12-hour timer with hold function, which will turn the fan off at predetermined time or will provide continuous operation, as well as a 2-speed switch that allows selection of desired air delivery volume.