Champion- Swamp/Evaporative Cooler

Champion- Swamp/Evaporative Cooler

How an Evaporative Cooler Works

20160408_150008_resizedNature’s most efficient means of cooling is through the evaporation of water. A simple example is the cooling you feel when stepping out of a swimming pool – the water evaporates quickly from your body, taking heat with it. Our coolers do essentially the same thing by drawing hot air through wet pads using a fan or blower. As water evaporates from the pads, it takes heat from the air with it, resulting in up to 30 degree cooler air being discharged from the cooler.

Cooling Temperatures

When operating an evaporative cooler, windows are opened part way to allow warm indoor air to escape as it is replaced by cooled air. Unlike central air conditioning systems that recirculate the same air, evaporative coolers provide a steady stream of fresh air into the house. Evaporative coolers cost about one-half as much to install as central air conditioners and use about one-quarter as much energy.

Energy Savings

An evaporative cooler consumes only one-fourth of the electrical energy required to operate a refrigerated air conditioning unit. This means you can save up to 75% of your cooling costs on your electric bill!

In fact, a typical whole-house evaporative cooler from Champion requires two small electric motors totaling between 1/3 and 3/4 horsepower. A comparable refrigeration unit requires three electric motors with a combined horsepower of 3 1/2.

Other Benefits

With evaporative cooling, a complete air change occurs every 1-3 minutes. This offers a great advantage over traditional refrigerated air conditioning, which employs a complicated “closed” system that constantly recirculates the same stale air.

  • Constant cool air movement pushes heat out – along with stale air, smoke, odors and pollution.
  • The high volume of fresh, cool air produced by the evaporative cooler helps your body ventilate naturally.
  • Evaporative cooling helps maintain natural humidity levels, so wood furniture and fabric fibers do no dry out prematurely.

Champion 5000

American made Champion coolers are built for high performance, easy installation and low maintenance. Before shipment, each Champion Cooler must pass performance tests and meet quality control standards to earn the Mark of a Champion. Attention: This evaporative cooler performs best in dry, arid climates.

  • Cools 1100 – 2400 sq. ft. based on motor selection
  • Circulates air at 5500-6500 CFM based on motor selection
  • For use with a 1/2 HP or 3/4 HP 1- or 2-speed motor for efficient cooling
  • Easy water connection for continuous use
  • Bolted construction offers easy access for parts replacement and eliminates welded seams for rust resistance
  • Machine balanced blower wheel offers quiet operation
  • Heavy-gauge galvanized steel metal cabinet is impact- and weather resistant
  • Polyester powder-coated exterior and interior finish for durability
  • 1-piece bottom pan helps prevent corrosion and leaks
  • This evaporative cooler performs best in dry, arid climates
  • Made in Denison, TX, USA
91683753

 

Champion 4001

The Champion Cooler Down Draft Evaporative Cooler Motor Not Included features a 1-piece bottom pan that resists corrosion by helping to eliminate the need for seams, spot welding and sealing materials. The cooler’s metal surfaces are coated with a polyester powder finish that provides a beautiful appearance and helps protect against moisture, chalking and discoloration. This cooler is great for arid climates. This evaporative cooler performs best in dry, arid climates.

  • Cools 800 – 1800 sq. ft. to help keep your living space comfortable
  • Circulates air at 4900 CFM based on motor selection
  • Designed for use with 1/3 or 1/2 HP, 1-speed and 2-speed motors (sold separately)
  • Easy water connection for continuous use
  • Cabinets made from heavy-gauge galvanized steel to resist weather and impact
  • All metal surfaces treated for corrosion with electrostatically-applied UV-stabilized polyester powder finish
  • Bolted construction for easy installation and access to replaceable parts
  • One-piece bottom pan for leak-proof operation keeps maintenance low
  • High-performance water pump ensures even water delivery
  • UL Classified for safe operation
  • This evaporative cooler performs best in dry, arid climates.
  • Made in Denison, TX, USA
91684019

 

Champion 3000

American made Champion coolers are built for high performance, easy installation and low maintenance. Before shipment, each Champion Cooler must pass performance tests and meet quality control standards to earn the Mark of a Champion. Attention: This evaporative cooler performs best in dry, arid climates.

  • Cools 600 – 1100 sq. ft. to help keep your living space comfortable
  • Delivers air at up to 3000 CFM based on motor selection
  • Designed for use with a 1/3 HP, 1 or 2-speed motor (sold separately)
  • Cabinets made from heavy-gauge galvanized steel to resist weather and impact
  • All metal surfaces treated for corrosion with electrostatically-applied UV-stabilized polyester powder finish
  • Bolted construction for easy installation and access to replaceable parts
  • One-piece bottom pan for leak-proof operation keeps maintenance low
  • High-performance water pump ensures even water delivery
  • UL Classified for safe operation
  • This evaporative cooler performs best in dry, arid climates
  • Made in Denison, TX, USA
  • THIS EVAPORATIVE COOLER PERFORMS BEST IN DRY, ARID CLIMATES.
  • Made in Denison, TX, USA!
91684288

ModelAirflowFor Areas ofInstalled
50006500 cfm1100-2400 sf$2695
40014900 cfm800-1800 sf$2495
30003000cfm600-1100 sf$2295